Function:frequency:highpass - Agilent Technologies InfiniiVision 3000 Programmer's Manual

15
:FUNCtion Commands

:FUNCtion:FREQuency:HIGHpass

Command Syntax
:FUNCtion:FREQuency:HIGHpass <3dB_freq>
<3dB_freq> ::= -3dB cutoff frequency value in NR3 format
The :FUNCtion:FREQuency:HIGHpass command sets the high- pass filter's
- 3 dB cutoff frequency.
The high- pass filter is a single- pole high pass filter.
This command is available with the DSOX3ADVMATH advanced math
license.
Query Syntax
:FUNCtion:FREQuency:HIGHpass?
The :FUNCtion:FREQuency:HIGHpass query returns the high- pass filter's
cutoff frequency.
Return Format
<3dB_freq><NL>
<3dB_freq> ::= -3dB cutoff frequency value in NR3 format
See Also •
322
(see page 1088)
":FUNCtion:OPERation"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 331