Search:serial:i2S:mode - Agilent Technologies InfiniiVision 3000 Programmer's Manual

27
:SEARch Commands

:SEARch:SERial:I2S:MODE

Command Syntax
:SEARch:SERial:I2S:MODE <value>
<value> ::= {EQUal | NOTequal | LESSthan | GREaterthan | INRange
The :SEARch:SERial:I2S:MODE command selects the type of I2S
information to find in the Lister display:
• EQUal— searches for the specified audio channel's data word when it
• NOTequal — searches for any word other than the specified word.
• LESSthan — searches for channel data words less than the specified
• GREaterthan — searches for channel data words greater than the
• INRange — searches for channel data words in the range.
• OUTRange — searches for channel data words outside the range.
Data word values are specified using the
:SEARch:SERial:I2S:PATTern:DATA command.
Value ranges are specified using the :SEARch:SERial:I2S:RANGe command.
Query Syntax
:SEARch:SERial:I2S:MODE?
The :SEARch:SERial:I2S:MODE? query returns the currently selected mode.
Return Format
<value><NL>
<value> ::= {EQU | NOT | LESS | GRE | INR | OUTR}
See Also
•
•
•
•
788
(see page 1088)
| OUTRange}
equals the specified word.
value.
specified value.
Chapter 27, ":SEARch Commands," starting on page 743
":SEARch:SERial:I2S:PATTern:DATA"
":SEARch:SERial:I2S:RANGe"
":SEARch:SERial:I2S:AUDio"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 789
on page 791
on page 787