Search:serial:a429:Label - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:SEARch:SERial:A429:LABel

Command Syntax
:SEARch:SERial:A429:LABel <value>
<value> ::= 8-bit integer in decimal, <hex>, <octal>, or <string>
<hex> ::= #Hnn where n ::= {0,..,9 | A,..,F}
<octal> ::= #Qnnn where n ::= {0,..,7}
<string> ::= "0xnn" where n::= {0,..,9 | A,..,F}
The :SEARch:SERial:A429:LABel command defines the ARINC 429 label
value when labels are used in the selected search mode.
Query Syntax
:SEARch:SERial:A429:LABel?
The :SEARch:SERial:A429:LABel? query returns the current label value in
decimal format.
Return Format
<value><NL> in decimal format
Errors •
See Also •
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
from 0-255
"- 241, Hardware missing"
"Introduction to :TRIGger Commands"
":SEARch:SERial:A429:MODE"
on page 1049
on page 843
on page 770
27
:SEARch Commands
769