Search:glitch:polarity - Agilent Technologies InfiniiVision 3000 Programmer's Manual

27
:SEARch Commands

:SEARch:GLITch:POLarity

Command Syntax
:SEARch:GLITch:POLarity <polarity>
<polarity> ::= {POSitive | NEGative}
The :SEARch:GLITch:POLarity command sets the polarity for the glitch
(pulse width) search.
Query Syntax
:SEARch:GLITch:POLarity?
The :SEARch:GLITch:POLarity? query returns the current polarity setting
for the glitch (pulse width) search.
Return Format
<polarity><NL>
<polarity> ::= {POS | NEG}
See Also
•
•
•
754
(see page 1088)
Chapter 27, ":SEARch Commands," starting on page 743
":SEARch:MODE" on page 746
":SEARch:GLITch:SOURce"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 757