Wmemory<R>:Yscale - Agilent Technologies InfiniiVision 3000 Programmer's Manual

33
:WMEMory<r> Commands
:WMEMory<r>:YSCale
Command Syntax
:WMEMory<r>:YSCale <scale>[<suffix>]
<r> ::= 1-2 in NR1 format
<scale> ::= vertical units per division in NR3 format
<suffix> ::= {V | mV}
The :WMEMory<r>:YSCale command sets the vertical scale, or units per
division, of the selected reference waveform.
Legal values for the scale are copied from the original source waveform
(that is, the analog channel or math function waveform that was originally
saved as a reference waveform).
Query Syntax
:WMEMory<r>:YSCale?
The :WMEMory<r>:YSCale? query returns the current scale setting for the
specified reference waveform.
Return Format
<scale><NL>
<scale> ::= vertical units per division in NR3 format
See Also •
•
•
•
•
994
(see page 1088)
Chapter 33, ":WMEMory<r> Commands," starting on page 985
":WMEMory<r>:DISPlay"
":WMEMory<r>:YOFFset"
":WMEMory<r>:YRANge"
":WMEMory<r>:SKEW"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 988
on page 992
on page 993
on page 991