Save:waveform:length - Agilent Technologies InfiniiVision 3000 Programmer's Manual

25
:SAVE Commands

:SAVE:WAVeform:LENGth

Command Syntax
:SAVE:WAVeform:LENGth <length>
<length> ::= 100 to max. length; an integer in NR1 format
When the :SAVE:WAVeform:LENGth:MAX setting is OFF, the
:SAVE:WAVeform:LENGth command sets the waveform data length (that is,
the number of points saved).
When the :SAVE:WAVeform:LENGth:MAX setting is ON, the
:SAVE:WAVeform:LENGth setting has no effect.
Query Syntax
:SAVE:WAVeform:LENGth?
The :SAVE:WAVeform:LENGth? query returns the current waveform data
length setting.
Return Format
<length><NL>
<length> ::= 100 to max. length; an integer in NR1 format
See Also
•
•
•
•
•
590
(see page 1088)
"Introduction to :SAVE Commands"
":SAVE:WAVeform:LENGth:MAX"
":SAVE:WAVeform[:STARt]"
":WAVeform:POINts" on page 936
":SAVE:WAVeform:FORMat"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 575
on page 591
on page 588
on page 589