Trigger:nreject - Agilent Technologies InfiniiVision 3000 Programmer's Manual

Hide thumbs Also See for InfiniiVision 3000:

Table of Contents

:TRIGger Commands

:TRIGger:NREJect

Command Syntax

:TRIGger:NREJect <value>

<value> ::= {{0 | OFF} | {1 | ON}}

The :TRIGger:NREJect command turns the noise reject filter off and on.

When the noise reject filter is on, the trigger circuitry is less sensitive to

noise but may require a greater amplitude waveform to trigger the

oscilloscope. This command is not valid in TV trigger mode.

Query Syntax

:TRIGger:NREJect?

The :TRIGger:NREJect? query returns the current noise reject filter mode.

Return Format

<value> ::= {0 | 1}