Agilent Technologies InfiniiVision 3000 Programmer's Manual page 359

Table 88 :LISTer Commands Summary
Command
n/a
:LISTer:DISPlay {{OFF
| 0} | {SBUS1 | ON |
1} | {SBUS2 | 2} |
ALL} (see page 361)
:LISTer:REFerence
<time_ref> (see
page 362)
Introduction to
The LISTer subsystem is used to turn on/off the serial decode Lister
:LISTer display and return data from the Lister display.
Commands
Agilent InfiniiVision 3000 X-Series Oscilloscopes
Programmer's Guide
17
:LISTer Commands
Query
:LISTer:DATA? (see
page 360)
:LISTer:DISPlay? (see
page 361)
:LISTer:REFerence?
(see page 362)
s1
Options and Query Returns
<binary_block> ::=
comma-separated data with
newlines at the end of each row
{OFF | SBUS1 | SBUS2 | ALL}
<time_ref> ::= {TRIGger |
PREVious}
359