Search:transition:source - Agilent Technologies InfiniiVision 3000 Programmer's Manual

27
:SEARch Commands

:SEARch:TRANsition:SOURce

Command Syntax
:SEARch:TRANsition:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :SEARch:TRANsition:SOURce command selects the channel on which
to search for edge transitions.
Query Syntax
:SEARch:TRANsition:SOURce?
The :SEARch:TRANsition:SOURce? query returns the current transition
search source.
Return Format
<source><NL>
<source> ::= CHAN<n>
See Also •
•
•
766
(see page 1088)
Chapter 27, ":SEARch Commands," starting on page 743
":SEARch:MODE" on page 746
":SEARch:TRANsition:SLOPe"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 765