Power:signals:vmaximum - Agilent Technologies InfiniiVision 3000 Programmer's Manual

23
:POWer Commands

:POWer:SIGNals:VMAXimum

Command Syntax
:POWer:SIGNals:VMAXimum <value>[suffix]
<value> ::= Maximum expected input Voltage in NR3 format
[suffix] ::= {V | mV}
The :POWer:SIGNals:VMAXimum command specifies the maximum expected
input voltage. This value is used to set the vertical scale of the channel
probing voltage.
This command is available for the Inrush Current and Turn On/Off Time
types of power analysis.
Query Syntax
:POWer:SIGNals:VMAXimum?
The :POWer:SIGNals:VMAXimum query returns the expected maximum
input voltage setting.
Return Format
<value><NL>
<value> ::= Maximum expected input Voltage in NR3 format
See Also •
•
•
•
•
•
•
•
•
•
546
(see page 1088)
":POWer:INRush:APPLy"
":POWer:ONOFf:APPLy"
":POWer:SIGNals:AUTosetup"
":POWer:SIGNals:CYCLes"
":POWer:SIGNals:DURation"
":POWer:SIGNals:IEXPected"
":POWer:SIGNals:OVERshoot"
":POWer:SIGNals:VSTeady"
":POWer:SIGNals:SOURce:CURRent<i>"
":POWer:SIGNals:SOURce:VOLTage<i>"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 524
on page 530
on page 541
on page 542
on page 543
on page 544
on page 545
on page 547
on page 548
on page 549