Trigger:tv:tvmode - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:TRIGger:TV:TVMode

Command Syntax
:TRIGger:TV:TVMode <mode>
<mode> ::= {FIEld1 | FIEld2 | AFIelds | ALINes | LINE | VERTical
The :TRIGger:TV:MODE command selects the TV trigger mode and field.
The LVERtical parameter is only available when :TRIGger:TV:STANdard is
GENeric. The LALTernate parameter is not available when
:TRIGger:TV:STANdard is GENeric (see
Old forms for <mode> are accepted:
<mode>
FIEld1
FIEld2
AFIeld
ALINes
LFIeld1
LFIeld2
LALTernate
LVERtical
The :TRIGger:TV:TVMode command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :TRIGger:TV:MODE command (see
Query Syntax
:TRIGger:TV:TVMode?
The :TRIGger:TV:TVMode? query returns the TV trigger mode.
Return Format
<value><NL>
<value> ::= {FIE1 | FIE2 | AFI | ALIN | LINE | VERT | LFI1 | LFI2
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
| LFIeld1 | LFIeld2 | LALTernate | LVERtical}
| LALT | LVER}
Obsolete and Discontinued Commands
page 913).
Old Forms Accepted
F1
F2
ALLFields, ALLFLDS
ALLLines
LINEF1, LINEFIELD1
LINEF2, LINEFIELD2
LINEAlt
LINEVert
page
34
910) instead.
1045