Search:serial:flexray:mode - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:SEARch:SERial:FLEXray:MODE

Command Syntax
:SEARch:SERial:FLEXray:MODE <value>
<value> := {FRAMe | CYCLe | DATA | HERRor | FERRor | AERRor}
The :SEARch:SERial:FLEXray:MODE command selects the type of FlexRay
information to find in the Lister display:
• FRAMe — searches for FlexRay frames with the specified frame ID.
• CYCLe — searches for FlexRay frames with the specified cycle number
• DATA — searches for FlexRay frames with the specified data, cycle
• HERRor — searches for header CRC errors.
• FERRor — searches for frame CRC errors.
• AERRor — searches for all errors.
Query Syntax
:SEARch:SERial:FLEXray:MODE?
The :SEARch:SERial:FLEXray:MODE? query returns the currently selected
mode.
Return Format
<value><NL>
<value> := {FRAM | CYCL | DATA | HERR | FERR | AERR}
See Also
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
and frame ID.
number, and frame ID.
Chapter 27, ":SEARch Commands," starting on page 743
":SEARch:SERial:FLEXray:FRAMe"
":SEARch:SERial:FLEXray:CYCLe"
":SEARch:SERial:FLEXray:DATA"
:SEARch Commands
on page 784
on page 781
on page 782
27
785