Agilent Technologies InfiniiVision 3000 Programmer's Manual page 447

These :MEASure commands are available when the DSOX3PWR power
measurements and analysis application is licensed and enabled.
Table 91 :MEASure Power Commands Summary
Command
:MEASure:ANGLe
[<source1>][,<source2
>] (see page 450)
:MEASure:APParent
[<source1>][,<source2
>] (see page 451)
:MEASure:CRESt
[<source>] (see
page 452)
:MEASure:EFFiciency
(see page 453)
:MEASure:ELOSs
[<source>] (see
page 454)
Agilent InfiniiVision 3000 X-Series Oscilloscopes
Programmer's Guide
20
:MEASure Power Commands
Query
:MEASure:ANGLe?
[<source1>][,<source2
>] (see page 450)
:MEASure:APParent?
[<source1>][,<source2
>] (see page 451)
:MEASure:CRESt?
[<source>] (see
page 452)
:MEASure:EFFiciency?
(see page 453)
:MEASure:ELOSs?
[<source>] (see
page 454)
s1
Options and Query Returns
<source1>, <source2> ::=
{CHANnel<n>}
<n> ::= 1 to (# analog channels)
in NR1 format
<return_value> ::= the power
phase angle in degrees in NR3
format
<source1>, <source2> ::=
{CHANnel<n>}
<n> ::= 1 to (# analog channels)
in NR1 format
<return_value> ::= the apparent
power value in NR3 format
<source> ::= {CHANnel<n>|
FUNCtion | MATH}
<n> ::= 1 to (# analog channels)
in NR1 format
<return_value> ::= the crest
factor value in NR3 format
<return_value> ::= percent value
in NR3 format
<source> ::= {CHANnel<n>|
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= the energy
loss value in NR3 format
447