Sbus<N>:Spi:source:miso - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:SBUS<n>:SPI:SOURce:MISO
Command Syntax
:SBUS<n>:SPI:SOURce:MISO <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :SBUS<n>:SPI:SOURce:MISO command sets the source for the SPI
serial MISO data.
Query Syntax
:SBUS<n>:SPI:SOURce:MISO?
The :SBUS<n>:SPI:SOURce:MISO? query returns the current source for the
SPI serial MISO data.
Return Format
<source><NL>
See Also •
•
•
•
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
"Introduction to :TRIGger Commands"
":SBUS<n>:SPI:SOURce:MOSI"
":SBUS<n>:SPI:SOURce:DATA"
":SBUS<n>:SPI:SOURce:CLOCk"
":SBUS<n>:SPI:SOURce:FRAMe"
":SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA"
":SBUS<n>:SPI:TRIGger:PATTern:MOSI:DATA"
":SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh"
":SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh"
on page 843
on page 714
on page 711
on page 710
on page 712
on page 715
on page 717
on page 716
on page 718
26
:SBUS<n> Commands
713