Function:source - Agilent Technologies InfiniiVision 3000 Programmer's Manual

34
Obsolete and Discontinued Commands

:FUNCtion:SOURce

Command Syntax
:FUNCtion:SOURce <value>
<value> ::= {CHANnel<n> | ADD | SUBTract | MULTiply}
<n> ::= 1 to (# analog channels) in NR1 format
The :FUNCtion:SOURce command is only used when an FFT (Fast Fourier
Transform), DIFF, or INT operation is selected (see
the:FUNCtion:OPERation command for more information about selecting an
operation). The :FUNCtion:SOURce command selects the source for
function operations. Choose CHANnel<n>, or ADD, SUBT, or MULT to
specify the desired source for function DIFF (differentiate), INTegrate, and
FFT operations specified by the :FUNCtion:OPERation command.
The :FUNCtion:SOURce command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :FUNCtion:SOURce1 command (see
Query Syntax
:FUNCtion:SOURce?
The :FUNCtion:SOURce? query returns the current source for function
operations.
Return Format
<value><NL>
<value> ::= {CHAN<n> | ADD | SUBT | MULT}
<n> ::= 1 to (# analog channels) in NR1 format
See Also
•
•
1010
(see page 1088)
"Introduction to :FUNCtion Commands"
":FUNCtion:OPERation"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 310
on page 331
page 336) instead.