Sbus<N>:A429:Trigger:label - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:SBUS<n>:A429:TRIGger:LABel
Command Syntax
:SBUS<n>:A429:TRIGger:LABel <value>
<value> ::= 8-bit integer in decimal, <hex>, <octal>, or <string>
<hex> ::= #Hnn where n ::= {0,..,9 | A,..,F}
<octal> ::= #Qnnn where n ::= {0,..,7}
<string> ::= "0xnn" where n::= {0,..,9 | A,..,F}
The :SBUS<n>:A429:TRIGger:LABel command defines the ARINC 429 label
value when labels are used in the selected trigger type.
To set the label value to don't cares (0xXX), set the value to - 1.
Query Syntax
:SBUS<n>:A429:TRIGger:LABel?
The :SBUS<n>:A429:TRIGger:LABel? query returns the current label value
in decimal format.
Return Format
<value><NL> in decimal format
Errors •
See Also
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
from 0-255 or "0xXX" (don't care)
"- 241, Hardware missing"
"Introduction to :TRIGger Commands"
":SBUS<n>:A429:TRIGger:TYPE"
on page 1049
on page 843
on page 616
26
:SBUS<n> Commands
611