31
:WAVeform Commands
:WAVeform:YINCrement
Query Syntax
:WAVeform:YINCrement?
The :WAVeform:YINCrement? query returns the y- increment value in volts
for the currently specified source. This value is the voltage difference
between consecutive data values. The y- increment for digital waveforms is
always "1".
Return Format
<value><NL>
<value> ::= y-increment value in the current preamble in 32-bit
See Also
•
•
Example Code
•
956
(see
page
1088)
floating point NR3 format
"Introduction to :WAVeform Commands"
":WAVeform:PREamble"
"Example Code"
on page 941
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 925
on page 940