Measure:statistics - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:MEASure:STATistics

Command Syntax
:MEASure:STATistics <type>
<type> ::= {{ON | 1} | CURRent | MINimum | MAXimum | MEAN | STDDev
The :MEASure:STATistics command determines the type of information
returned by the :MEASure:RESults? query. ON means all the statistics are
on.
Query Syntax
:MEASure:STATistics?
The :MEASure:STATistics? query returns the current statistics mode.
Return Format
<type><NL>
<type> ::= {ON | CURR | MIN | MAX | MEAN | STDD | COUN}
See Also
•
•
•
•
•
Example Code
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
| COUNt}
"Introduction to :MEASure Commands"
":MEASure:RESults" on page 415
":MEASure:STATistics:DISPlay"
":MEASure:STATistics:RESet"
":MEASure:STATistics:INCRement"
"Example Code" on page 415
on page 388
on page 424
on page 427
on page 425
19
:MEASure Commands
423