Hardcopy:factors - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:HARDcopy:FACTors

Command Syntax
:HARDcopy:FACTors <factors>
<factors> ::= {{OFF | 0} | {ON | 1}}
The HARDcopy:FACTors command controls whether the scale factors are
output on the hardcopy dump.
Query Syntax
:HARDcopy:FACTors?
The :HARDcopy:FACTors? query returns a flag indicating whether
oscilloscope instrument settings are output on the hardcopy.
Return Format
<factors><NL>
<factors> ::= {0 | 1}
See Also
•
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
"Introduction to :HARDcopy Commands"
":HARDcopy:STARt" on page 357
":HARDcopy:FFEed"
":HARDcopy:INKSaver"
":HARDcopy:LAYout"
":HARDcopy:PALette"
on page 346
on page 347
on page 348
on page 355
:HARDcopy Commands
on page 342
16
345