Trigger:tv:udtv:pgthan - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:TRIGger:TV:UDTV:PGTHan

Command Syntax
:TRIGger:TV:UDTV:PGTHan <min_time>
<min_time> ::= seconds in NR3 format
The :TRIGger:TV:UDTV:PGTHan command specifies the "greater than the
sync pulse width" time in the Generic video trigger. This setting allows
oscilloscope synchronization to the vertical sync.
This command is available with the DSOX3VID extended Video triggering
license.
Query Syntax
:TRIGger:TV:UDTV:PGTHan?
The :TRIGger:TV:UDTV:PGTHan query returns the "greater than the sync
pulse width" time setting.
Return Format
<min_time><NL>
<min_time> ::= seconds in NR3 format
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
":TRIGger:TV:STANdard"
":TRIGger:TV:UDTV:ENUMber"
":TRIGger:TV:UDTV:HSYNc"
on page 913
on page 914
on page 915
30
:TRIGger Commands
917