Search:runt:polarity - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:SEARch:RUNT:POLarity

Command Syntax
:SEARch:RUNT:POLarity <slope>
<polarity> ::= {POSitive | NEGative | EITHer}
The :SEARch:RUNT:POLarity command sets the polarity for the runt
search.
Query Syntax
:SEARch:RUNT:POLarity?
The :SEARch:RUNT:POLarity? query returns the currently set runt polarity.
Return Format
<slope><NL>
<polarity> ::= {POS | NEG | EITH}
See Also •
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
Chapter 27, ":SEARch Commands," starting on page 743
":SEARch:MODE" on page 746
":SEARch:RUNT:SOURce" on page 761
27
:SEARch Commands
759