Agilent Technologies InfiniiVision 3000 Programmer's Manual page 722

26
:SBUS<n> Commands
Table 106 :SBUS<n>:UART Commands Summary (continued)
Command
:SBUS<n>:UART:SOURce:
RX <source> (see
page 734)
:SBUS<n>:UART:SOURce:
TX <source> (see
page 735)
:SBUS<n>:UART:TRIGger
:BASE <base> (see
page 736)
:SBUS<n>:UART:TRIGger
:BURSt <value> (see
page 737)
:SBUS<n>:UART:TRIGger
:DATA <value> (see
page 738)
:SBUS<n>:UART:TRIGger
:IDLE <time_value>
(see page 739)
:SBUS<n>:UART:TRIGger
:QUALifier <value>
(see page 740)
722
Query
:SBUS<n>:UART:SOURce:
RX? (see page 734)
:SBUS<n>:UART:SOURce:
TX? (see page 735)
:SBUS<n>:UART:TRIGger
:BASE? (see page 736)
:SBUS<n>:UART:TRIGger
:BURSt? (see
page 737)
:SBUS<n>:UART:TRIGger
:DATA? (see page 738)
:SBUS<n>:UART:TRIGger
:IDLE? (see page 739)
:SBUS<n>:UART:TRIGger
:QUALifier? (see
page 740)
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
Options and Query Returns
<source> ::= {CHANnel<n> |
EXTernal} for DSO models
<source> ::= {CHANnel<n> |
DIGital<d>} for MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<source> ::= {CHANnel<n> |
EXTernal} for DSO models
<source> ::= {CHANnel<n> |
DIGital<d>} for MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<base> ::= {ASCii | HEX}
<value> ::= {OFF | 1 to 4096 in
NR1 format}
<value> ::= 8-bit integer from
0-255 (0x00-0xff) in decimal,
<hexadecimal>, <binary>, or
<quoted_string> format
<hexadecimal> ::= #Hnn where n
::= {0,..,9 | A,..,F} for
hexadecimal
<binary> ::= #Bnn...n where n ::=
{0 | 1} for binary
<quoted_string> ::= any of the
128 valid 7-bit ASCII characters
(or standard abbreviations)
<time_value> ::= time from 1 us
to 10 s in NR3 format
<value> ::= {EQUal | NOTequal |
GREaterthan | LESSthan}