Honda CR-V 1997 Service Manual page 100

Engine Removaillnstallation
Removal (cont'd)
10. Remove the cruise control actuator (see section 4).
11. Remove the mounting bolt and lock bolt, then
remove the
PIS
pump belt and pump.
MOUNTING BOLT
8x1.25mm
24 N'm (2.4 kg/·m, 17
(bf.ftl
--.............
PIS
PUMP
) E L T
8x1.25mm
24 N'm (2.4 kg/·m, 17
Ibf.ftl
12. Loosen the idler pulley bracket bolt and adjusting
bolt, then remove the air conditioning (NC) com-
pressor belt.
ADJUSTING BOLT
LOCKNUT
ax 1.25 mm
24 N'm (2.4 kg/·m, 17 Ibf.ltl
IDLER PULLEY BRACKET BOLT
10 x 1.25 rnm
44 N·m (4.5 kg/'m, 33 Ibf.f'1
5-4
\
AIC COMPRESSOR
BELT
13. Relieve fuel pressure (see section 11).
Do not smoke while working on the
system. Keep open flame or spark away from
the work area. Drain fuel only into an approved
container.
14. Remove the evaporative emission (EVAP) control
canister hose and fuel feed hose.
"
\'
\~~ '~\\
/i!:f~f ~
FUELFEED \
f,
~ 1~
HOSE I ' /
EVAP CONTROL
CANISTER HOSE