Rotor Slip Ring Test; Stator Test - Honda CR-V 1997 Service Manual

Rotor Slip Ring Test
1. Check the resistance between the slip rings.
There should be 1.8 - 3.0 ohms.
• If resistance meets the specification, go to step 2 .
• If resistance does not meet the specifica tion,
replace the a lte rnator.
ROTOR SHAFT
SLIP RINGS
ROTOR
2. Check that there is no co ntinuity between the slip
rings and the rotor or rotor shaft.
3. If the rotor fails either continuity check. repla ce the
alternator.
Stator Test
r:-:'I
~
1. Check that there is continuity between each pair of
leads.
LEADS
COIL CORE
2. Check that the re is no continuity between each lead
and the coil core.
3. If the coi l fails either contin uity check, replace the
a lternator.
4-33