Honda CR-V 1997 Service Manual page 85

If adjustment is necessary:
1. Loosen the mounting nut and the locknut.
2. Move th e alternator t o obtain the proper belt ten-
sion, then retighten the nuts.
LOCKNUT
8
x
1.25
mm
24 N'm 12.4 kg/·m . 17 Ibf.ft)
MOUNTING NUT
10 x 1.25 mm
44 N·m 10.5 kg/·m . 33 Ibf.ft)
3. Recheck the deflection or ten sion of the belt.
NOTE: For the power steering pump belt and
NC
compressor belt adjustments, refer to section 17 and
section 22.
4-35