Show System Audit - Dell PowerConnect J-EX4200-24T Software Manual

show system audit

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Additional Information
Required Privilege
Level
List of Sample Output
show system audit show system audit
root-only root-only
show system audit
<root-only>
show system audit
<all-members>
<local>
<member member-id>
<root-only>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display the state and checksum values for file systems.
—Display the state and checksum values for all file systems.
none
—(J-EX4200 switches only) (Optional) Display file system MD5 hash and
all-members
permissions information on all members of the Virtual Chassis configuration.
—(J-EX4200 switches only) (Optional) Display file system MD5 hash and permissions
local
information on the local Virtual Chassis member.
—(J-EX4200 switches only) (Optional) Display file system MD5 hash
member member-id
and permissions information on the specified member of the Virtual Chassis
configuration. Replace
root-only —(Optional) Check only the root (/) file system.
To redirect the output to a file, issue the following command:
ssh router-name 'show system audit root-only' > output-file
If you save the output of the
compare it to subsequent output from the command to determine whether anything has
changed.
admin
show system audit root-only on page 671
user@host> show system audit root-only
# user: root
# machine: my-host
# tree: /
date: Fri Feb 11 21:21:46 2000
# .
/set type=file uid=0 gid=0 mode=0755 nlink=1
. type=dir nlink=23 size=1024 time=950252640.0
.cshrc uid=3 gid=7 mode=0644 size=177 time=939182975.0 \
md5digest=f414e06fea6bd646244b98e13d6e6226
.kernel.jkernel.backup \
Chapter 42: Operational Mode Commands for System Monitoring
with a value from 0 through 9.
member-id
show system audit root-only
command to a file, you can
671