Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Configuration_Image.fm
show startup-config
The show startup-config Privileged EXEC mode command displays the
startup configuration file contents.
Syntax
show startup-config
Command Mode
Privileged EXEC mode
Example
The following example displays the startup configuration file contents.
Console#
show startup-config
no spanning-tree
gi1/0/
interface range
1-48
speed 1000
exit
no lldp run
interface vlan 1
ip address 1.1.1.1 255.0.0.0
exit
line console
exec-timeout 0
exit
console#
show bootvar
The show bootvar EXEC mode command displays the active system image
file that is loaded by the device at startup.
Syntax
[unit unit]
show bootvar
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
140
Configuration/Image File Commands
Advertisement
Table of Contents
