Show Bootvar - Dell Networking 2024 Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example shows backup-config data.
console#show backup-config
!Current Configuration:
!System Description "Dell Networking N4032, 6.0.0.0, Linux 2.6.32.9"
!System Software Version 6.0.0.0
!Cut-through mode is configured as disabled
!
configure
slot 1/0 1 ! Dell Networking N4032
stack
member 1 1 ! N4032
exit
interface vlan 1
exit
snmp-server engineid local 800002a203001122334455
exit

show bootvar

Use the show bootvar command in User EXEC mode to display the active
system image file that the device loads at startup.
Syntax
unit
show bootvar [
unit —Unit number.
•
]
Configuration and Image File Commands
1471