Chapter 3 Using The Zyair Utility; Accessing The Zyair Utility; Viewing Current Configuration; Figure 3-1 Zyair Utility: System Tray Icon - ZyXEL Communications ZyAIR B-620 User Manual

This chapter shows you basic ZyAIR wireless LAN configuration using the ZyAIR Utility.
Install the ZyAIR before you proceed. Refer to the Quick Installation Guide.
For Windows XP users: disable the Windows XP wireless configuration tool first
Screen shots for Windows XP are shown unless otherwise specified.
3.1

Accessing the ZyAIR Utility

Follow the steps below to access the ZyAIR Utility
After you installed the ZyAIR Utility, an icon for the ZyAIR Utility appears in the system tray.
When the ZyAIR Utility system tray icon displays, the ZyAIR is installed properly.
The color of the ZyAIR Utility system tray icon indicates the status of the ZyAIR. Refer to the following
table for details.
COLOR
Red The ZyAIR is working properly but is not connected to any AP or wireless station.
Blue The ZyAIR is connected to a wireless network.
Double click on the ZyAIR Wireless LAN Utility icon in the system tray to open the ZyAIR Utility.
3.2

Viewing Current Configuration

When the ZyAIR Utility starts, the Link Info screen displays, showing the current configuration of your
ZyAIR. The model name shown in the screens may vary depending on the model you are using.
Using the ZyAIR Utility
Using the ZyAIR Utility
before you proceed. Refer to Chapter 2.

Figure 3-1 ZyAIR Utility: System Tray Icon

Table 3-1 ZyAIR Utility: System Tray Icon

DESCRIPTION
ZyAIR B-620 User's Guide
Chapter 3
3-1