Task
Display detailed information about IPv6
UDP connections (MSR 2600/MSR
3600).
Display detailed information about IPv6
UDP connections (MSR 5600).
Display ICMPv6 traffic statistics (MSR
2600/MSR 3600).
Display ICMPv6 traffic statistics (MSR
5600).
Display IPv6 TCP traffic statistics (MSR
2600/MSR 3600).
Display IPv6 TCP traffic statistics (MSR
5600).
Display IPv6 UDP traffic statistics (MSR
2600/MSR 3600).
Display IPv6 UDP traffic statistics (MSR
5600).
Clear IPv6 neighbor information (MSR
2600/MSR 3600).
Clear IPv6 neighbor information (MSR
5600).
Clear path MTUs.
Clear IPv6 and ICMPv6 packet statistics
(MSR 2600/MSR 3600).
Clear IPv6 and ICMPv6 packet statistics
(MSR 5600).
Clear IPv6 TCP traffic statistics.
Clear IPv6 UDP traffic statistics.
For more information about the display tcp statistics command, the display udp statistics command, the
reset tcp statistics command, and the reset udp statistics command, see Layer 3—IP Services Command
Reference.
IPv6 basics configuration example
Network requirements
As shown in
Configure a route to the host on Router B. Enable IPv6 for the host to automatically obtain an IPv6
address through IPv6 ND. The host has a route to Router B.
Figure
75, configure IPv6 addresses for the routers and verify that they can reach each other.
Command
display ipv6 udp verbose [ pcb pcb-index ]
display ipv6 udp verbose [ slot slot-number [ pcb pcb-index ] ]
display ipv6 icmp statistics
display ipv6 icmp statistics [ slot slot-number ]
display tcp statistics
display tcp statistics [ slot slot-number ]
display udp statistics
display udp statistics [ slot slot-number ]
reset ipv6 neighbors { all | dynamic | interface interface-type
interface-number | static }
reset ipv6 neighbors { all | dynamic | interface interface-type
interface-number | slot slot-number | static }
reset ipv6 pathmtu { all | dynamic | static }
reset ipv6 statistics
reset ipv6 statistics [ slot slot-number ]
reset tcp statistics
reset udp statistics
198