Korg Electronic Keyboard Parameter Manual page 509

"Input Channel": 01
"Output Channel" 01
5. Set KARMA Module [B] as follows.
"GE Select": a riff of GE category Bass
"Input Channel": 02
"Output Channel" 02
6. Set KARMA Module [C] as follows.
"GE Select": a drum pattern (a pattern of GE
category Drums)
"Input Channel": Tch
"Output Channel" 03
7. In Track Select, select Track01, and play the
keyboard.
(KARMA function on)
The Guitar riff of KARMA Module [A] will be
sounded by the Guitar type program.
Simultaneously, the drum pattern of KARMA
Module [C] will be sounded by the Drums program.
8. In Track Select, select Track02, and play the
keyboard.
(KARMA function on)
The Bass riff of KARMA Module [B] will be
sounded by the Bass type program.
Simultaneously, the drum pattern of KARMA
Module [C] will be sounded by the Drums program.
Track Thru (when KARMA Off)
"Input Channel" and "Output Channel" settings are
normally valid only when the KARMA ON/OFF
switch is on.
As an exception, "Track Thru" specifies whether the
MIDI data that passes through the KARMA Module
will be sent (Thru) to the track when the KARMA
ON/OFF switch is off.
On (checked): MIDI data that passes through the
KARMA Module will be sent on the "Output Channel"
to the track when the KARMA ON/OFF switch is off.
Off (unchecked): MIDI data that passes through the
KARMA Module will not be sent to the track when the
KARMA ON/OFF switch is off.
For examples of using this setting, see "Timbre Thru
(when KARMA Off)" on page 377.
Module – Track MIDI Display
tracks that will be sounded by each KARMA Module,
according to the MIDI output channel settings of each
KARMA Module and the MIDI channel of each track
(Sequencer 2–1b: MIDI Channel).
[Off, On]
This shows the MIDI
Sequencer P7: KARMA
▼ 7–1: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 138.
• 0: Memory Status. For more information, see
"Memory Status" on page 524.
• 1: Exclusive Solo. For more information, see
"Exclusive Solo" on page 138.
• 2: Copy KARMA Module. For more information,
see "Copy KARMA Module" on page 408.
• 3: Initialize KARMA Module. For more
information, see "Initialize KARMA Module" on
page 409.
• 4: Copy Scene. For more information, see "Copy
Scene" on page 409.
• 5: Swap Scene. For more information, see "Swap
Scene" on page 409.
• 6: Capture Random Seed. For more information,
see "Capture Random Seed" on page 409.
• 7: FF/REW Speed. For more information, see
"FF/REW Speed" on page 525.
• 8: Set Location (for Locate Key). For more
information, see "Set Location (for Locate Key)" on
page 525.
• 9: Copy From Program. For more information, see
"Copy From Program" on page 526.
7–1: GE Setup/Key Zones
499