133: Od/Hi Gain - Multitap Dly - Korg Electronic Keyboard Parameter Manual

Drive
Sets the degree of distortion.
Output Level
Sets the overdrive output level.
Source
Selects the modulation source for the overdrive output
level.
Amount
Sets the modulation amount of the overdrive output
level.
EQ
Low Fc [Hz]
Sets the center frequency for Low EQ (shelving type).
Gain [dB]
Sets the gain of the Low EQ.
Mid1 Fc [Hz]
Sets the center frequency for Mid/High EQ 1 (peaking
type).
Q
Sets the band width of Mid/High EQ 1. p.773.
Gain [dB]
Sets the gain of Mid/High EQ 1.
Mid2 Fc [Hz]
Sets the center frequency for Mid/High EQ 2 (peaking
type).
Q
Sets the band width of Mid/High EQ 2. p.773.
Gain [dB]
Sets the gain of Mid/High EQ 2.

133: OD/Hi Gain - Multitap Dly

This effect combines a mono overdrive/high-gain
distortion and a multitap delay
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Overdrive / Hi-Gain
3 Band PEQ
+
Driver
Output Level
Mode: Overdrive / Hi-Gain
Drive
Right
OD/HI-GAIN
DRIVE
For more information on these parameters, see
"DRIVE" on page 788.
[1...100]
[0...50]
[Off...Tempo]
[–50...+50]
[20...1.00k]
[–18...+18]
[300...10.00k]
[0.5...10.0]
[–18...+18]
[500...20.00k]
[0.5...10.0]
[–18...+18]
Wet / Dry
Multitap Delay
Feedback
Delay
(2)
(1)
High Damp
Mt.Dly Wet / Dry
Wet / Dry
Mono-Mono Serial 133: OD/Hi Gain - Multitap Dly
PHASER
LFO
Waveform
Selects the LFO Waveform.
Frequency [Hz]
Sets the LFO speed.
PHASER
Manual
Sets the frequency to which the effect is applied.
Depth
Sets the depth of LFO modulation.
Resonance
Sets the resonance amount. p.805.
Output Mode
Selects whether the phaser output is mono or pseudo-
stereo. For more information, see "Output Mode" on
page 857.
When Routing is set to Phaser→ → → → Comp, Output Mode
will automatically be set to Normal.
Wet/Dry
Sets the phaser effect balance. p.780, p.806.
Source
Selects the Wet/Dry modulation source for the phaser.
Amount
Sets the Wet/Dry modulation amount for the phaser.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
Drive Mode
Switches between overdrive and high-gain distortion.
Drive
Sets the degree of distortion.
Output Level
Sets the overdrive output level
Source
Selects the modulation source for the overdrive output
level.
Amount
Sets the modulation amount of the overdrive output
level.
[Triangle, Sine]
[0.02...20.00]
[0...100]
[0...100]
[+/–100]
[Normal, Wet Invert]
[Dry, 1:99...99:1, Wet]
[Off...Tempo]
[+/–100]
[Overdrive, Hi-Gain]
[1...100]
[0...50]
[Off...Tempo]
[–50...+50]
871