Table of Contents
Advertisement
To: Song: 000
Track: 03
Measure: 009
Beat.Tick: 01.000
8. Press the OK button to execute the command.
After execution, select song 000 and play it back.
The effect for track 3 will change to 048: Stereo
Flanger at measure 9.
9. In song 000, you can press the COMPARE switch
(it will light) and play back to hear the song as it
was before you executed "Put Effect Setting to
Track."
You can use the COMPARE switch to compare the
state of the track before and after execution.
Note: In the P4: Track Edit page of song 000, set
Track Select to Track 03 and choose the "MIDI
Event Edit" page menu command to access the
Event Edit screen. (In the Set Event Filters dialog
box, check "Exclusive.")
Notice that a MIDI parameter change system
exclusive message is inserted at measure 9 of track
3.
Sequencer: Page Menu Commands
Put Effect Setting to Track
559
Advertisement
Table of Contents
