056: Stereo Auto Fade Mod - Korg Electronic Keyboard Parameter Manual

Korg electronic keyboard user manual
Table of Contents

Advertisement

Effect Guide
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.

056: Stereo Auto Fade Mod.

This stereo chorus/flanger effect enables you to control
the LFO speed and effect balance using auto fade, and
you can spread the sound by offsetting the phase of the
left and right LFOs from each other.
Stereo In - Stereo Out
Left
Right
LFO: Tri / Sine
LFO Shape
AutoFade
AUTOFADE
For more information on the Autofade parameters, see
"AUTOFADE" on page 809.
Source
Selects the modulation source that starts AutoFade.
Rate
Sets the rate of fade-in.
Fade-In Delay [msec]
Sets the fade-in delay time.
LFO Frequency Mod
Switches between D-mod and AUTOFADE for the LFO
frequency modulation.
Wet/Dry Mod
Switches between D-mod and AUTOFADE for the
effect balance modulation.
MOD DELAY
L Delay Time [msec]
Sets the left channel delay time.
R Delay Time [msec]
Sets the right channel delay time.
Depth
Sets the depth of LFO modulation.
Feedback
Sets the feedback amount. p.798.
High Damp [%]
Sets the feedback damping amount in the high range✎
p.803.
810
Wet / Dry
Delay
Feedback
High Damp
Delay
Wet / Dry
LFO Phase
LFO Frequency
Wet / Dry
[Off...Tempo]
[1...100]
[00...2000]
[Dmod, AUTOFADE]
[Dmod, AUTOFADE]
[0.0...500.0]
[0.0...500.0]
[0...200]
[+/–100]
[0...100]
LFO
Waveform
Selects the LFO Waveform.
Shape
Changes the curvature of the LFO Waveform. p.780.
Phase [degrees]
Sets the LFO phase difference between the left and
right. See "Phase [degrees]" on page 779.
Frequency [Hz]
This sets the LFO speed, in Hz.
Source
This selects a modulation source for the Frequency.
Amount
This sets the Frequency modulation amount, in Hz.
Type
[Individual, Common1, Common2]
This controls whether the effect uses its individual
LFO, or one of the Common FX LFOs. For more
information, see "LFO Type" on page 777.
Common LFO Phase Offset [degrees]
When Type is set to Common FX LFO 1 or 2, this lets
you offset the phase from the master LFO.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
[Triangle, Sine]
[+/–100]
[–40...+40]
[0.02...20.00]
[Off...Tempo]
[–20.00...+20.00]
[+/–180]

Advertisement

Table of Contents
loading

Table of Contents