Korg Electronic Keyboard Parameter Manual page 453

Korg electronic keyboard user manual
Table of Contents

Advertisement

Solo switch and Select switches 1–6
Solo
Solo lets you isolate one or more MIDI Tracks, HDR
Audio Tracks, or Audio Inputs, so that you hear them
by themselves. It does this by temporarily muting all
non-soloed Tracks and Inputs.
The Select switches can show and control either which
Input is currently selected, or which Inputs are soloed.
The main Solo button lets you switch back and forth
between the two views.
When the Solo button is Off (LED = Off), the Select
switches select the current Input; when the Solo button
is On (LED = On or blinking), the Select switches let
you solo one or more Inputs.
When Solo is On, and one or more Tracks or Audio
Inputs are soloed, the Solo LED will blink on and off to
remind you that solo is in use.
NOTE: The main Solo button merely changes the
functions of the Select switches. It does not enable or
clear the individual solo states.
0–9d
0–9d: Audio HDR 1–8 and HDR 9–16
These Control Assign settings let you control the
volume, pan, EQ, and send levels for each of the 16
hard-disk Audio Tracks, eight at a time.
Except for Pan, the audio track mixer functions
identically to the MIDI Track mixer, as described under
"0–9b: MIDI Tracks 1–8 and 9–16" on page 439.
Pan is slightly different for audio tracks: hard left is
L000 (as opposed to L001), and the Random setting is
not available.
Sequencer P0: Play/REC
For more information, see "Clearing all solos" on
page 440, and "Exclusive Solo menu parameter" on
[Off, On]
page 440.
Select (1–6)
This switch either selects or solos the input, depending
on the Solo switch setting. For more details, see "Solo,"
above.
Volume Sliders 1–6
Audio Input Volume (1–6)
These sliders adjust the volume levels of the audio
inputs.
Master Volume Slider
Master Volume
This controls the volume of the main stereo outputs,
after the Total Effects. It does not affect Individual
Outputs 1–8. For more information, see the diagram
"Master Volume" on page 441.
0–9: Control Surface
[Off, On]
[000...127]
[000...127]
443

Advertisement

Table of Contents
loading

Table of Contents