080: Stereo/Cross Long Delay; 081: Stereo Multitap Delay - Korg Electronic Keyboard Parameter Manual

080: Stereo/Cross Long Delay

This is a stereo delay, and can by used as a cross-
feedback delay effect in which the delay sounds cross
over between left and right by changing the feedback
routing. You can set a maximum of 2,730msec for the
delay time.
Stereo In - Stereo Out
Left
High Damp Low Damp
Delay
Input Level D-mod
Stereo/Cross
Feedback
High Damp Low Damp
Input Level D-mod
Delay
Right
INPUT
Input Level Dmod [%]
Sets the modulation amount of the input level. p.820.
Source
Selects the modulation source for the input level. p.820.
DELAY
Stereo/Cross
Switches between stereo delay and cross-feedback
delay.
L Delay Time [msec]
Sets the delay time for the left channel.
R Delay Time [msec]
Sets the delay time for the right channel.

081: Stereo Multitap Delay

The left and right Multitap Delays have two taps
respectively. Changing the routing of feedback and tap
output allows you to create various patterns of
complex effect sounds.
Stereo In - Stereo Out
Left
Feedback
Input Level D-mod
High Damp Low Damp
Mode Tap1 Level
High Damp Low Damp
Input Level D-mod
Feedback
Right
INPUT
Input Level Dmod [%]
Sets the modulation amount of the input level✎ p.820.
Source
Selects the modulation source for the input level. p.820.
Wet / Dry
Stereo/Cross Spread
Wet / Dry
[+/–100]
[Off...Tempo]
[Stereo, Cross]
[0.0...] 2730.0
[0.0...] 2730.0
Wet / Dry
Delay
(2)
(1)
Tap1=(1)
Mode Spread
Tap2=(2)
(1)
(2)
Delay
Wet / Dry
[+/–100]
[Off...Tempo]
Delay 080: Stereo/Cross Long Delay
L Feedback
Sets the feedback amount for the left channel.
R Feedback
Sets the feedback amount for the right channel.
Source
Selects the modulation source of feedback amount.
L Amount
Sets the modulation amount of the left channel
feedback.
R Amount
Sets the modulation amount of the right channel
feedback.
High Damp [%]
Sets the damping amount in the high range. p.829.
Low Damp [%]
Sets the damping amount in the low range. p.829.
Spread
Sets the width of the stereo image of the effect sound.
p.829.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
DELAY
Mode
This lets you alter the stereo image by switching the
inputs and feedback paths of the left and right delays,
as shown in the figure below. In order for this to be
effective, the input needs to be a true stereo signal.
Mode: Normal Mode: Cross Feedback
Mode: Cross Pan1 Mode: Cross Pan2
Tap1 Time [msec]
Sets the Tap1 delay time.
[+/–100]
[+/–100]
[Off...Tempo]
[+/–100]
[+/–100]
[0...100]
[0...100]
[–50...+50]
[Normal, Cross Feedback,
Cross Pan1, Cross Pan2]
[0.0...1360.0]
831