Korg Electronic Keyboard Parameter Manual page 492

Sequencer mode
Bottom Slope
Specifies the range of keys (12 is one octave) over
which the volume will be reached starting from the
bottom key.
0: The volume will be at the original level from the
bottom key.
Zone Map
Key zone display
Bottom Key
Track 1
Track 16
C–1
Bottom Key
Specifies the bottom key (lower limit) of the notes that
will sound each MIDI track.
How volume will change according to keyboard location
Volume
Bottom Slope
Bottom Key
Top Key and Bottom Key settings can also be input by
holding down the ENTER switch and playing a note
on the keyboard.
It is not possible to set the bottom key above the top
key of the same track. Nor is it possible for the top
and bottom slopes to overlap.
Track 02...16 (Track Number)
These are the key zone settings for MIDI tracks 2
through 16. They are the same as for track 1. See "Track
01":.
▼ 3–5: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 138.
• 0: Memory Status. For more information, see
"Memory Status" on page 524.
• 1: Exclusive Solo. For more information, see
"Exclusive Solo" on page 138.
• 2: Rename Song. For more information, see
"Rename Song" on page 524.
482
[00, 01, 02, 03, 04, 06, 08, 10,
12, 18, 24, 30, 36, 48, 60, 72]
Selecting track
Bottom Slope
E1
[C–1...G9]
Top Slope
Top Key
12: The volume will increase gradually as you play
upward, and will reach the original volume one octave
above the bottom key.
72: The volume will increase gradually as you play
upward, and will reach the original volume six octaves
above the bottom key.
Top Slope
G9
• 3: Delete Song. For more information, see "Delete
Song" on page 524.
• 4: Copy From Song. For more information, see
"Copy From Song" on page 524.
• 5: Load Template Song. For more information, see
"Load Template Song" on page 524.
• 6: Save Template Song. For more information, see
"Save Template Song" on page 525.
• 7: FF/REW Speed. For more information, see
"FF/REW Speed" on page 525
Key
• 8: Set Location (for Locate Key.) For more
information, see "Set Location (for Locate Key)" on
page 525.
• 9: GM Initialize. For more information, see "GM
Initialize" on page 526.
• 10: Copy From Combination. For more
information, see "Copy from Combination" on
page 526.
• 11: Copy From Program. For more information, see
"Copy From Program" on page 526.
Velocity zone display
Top Velocity
Top Slope
Bottom Slope
Bottom Velocity
1 16
Track