1-8: Set Up Controllers - Korg Electronic Keyboard Parameter Manual

Korg electronic keyboard user manual
Table of Contents

Advertisement

▼ 1–7: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 138.
• 0: Write Combination. For more information, see
"Write Combination" on page 405.
1–8: Set Up Controllers
1–1a
1–8a
1–8b
Here you can set the Combination functions of the
SW1 switch, SW2 switch, and the Realtime Modulation
Knob 5–8. These settings are made independently for
each combination.
1–8a: Panel Switch Assign
Here you can assign the function of the SW1 and SW2
switches. For details on the functions that can be
assigned, see "SW1/2 Assignments" on page 979.
SW1
Assigns a function to the SW1 switch. The on/off
status can also be saved. When you change the
assigned function, the status will be reset to off.
Mode
Specifies the on/off action that occurs when you press
the SW1 switch.
Toggle: The function will alternate between on and off
each time you press the SW1 switch.
Momentary: The function will be on only while you
continue holding down the SW1 switch.
Combination P1: EQ/Vector/Controller
[Off, ..., After Touch Lock]
[Toggle, Momentary]
• 1: Exclusive Solo. For more information, see
"Exclusive Solo" on page 138.
• 2: Copy From Program. For more information, see
"Copy From Program" on page 405.
• 3: Copy Vector Envelope. For more information,
see "Copy Vector Envelope" on page 144.
SW2
Mode
Assigns a function to the SW2 switch. The functions
you can assign to the SW2 switch are the same as for
the SW1 switch with the exception than SW1
Mod.:CC#80 is replaced by SW2 Mod.:CC#81.
1–8b: Realtime Modulation Knob Assign
Here you can assign the function of the realtime
modulation knobs 5 through 8. Most of the functions
that can be assigned are control changes. For more
information, please see "Realtime Knobs 5–8
Assignments" on page 980.
The functions you assign here are performed when
you operate realtime modulation knobs 5 through 8.
1–8: Set Up Controllers
1–8PMC
[Off, ..., After Touch Lock]
[Toggle, Momentary]
357

Advertisement

Table of Contents
loading

Table of Contents