Resonance
Sets the resonance amount. p.805.
Output Mode
Selects whether the phaser output is mono or pseudo-
stereo. For more information, see "Output Mode" on
page 857.
Wet/Dry
Sets the phaser effect balance. p.780, p.806.
113: P4EQ - Multitap Delay
This effect combines a mono four-band parametric
equalizer and a multitap delay.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Parametric 4Band EQ
+
Trim
Right
PARAMETRIC EQ
Trim
Sets the parametric EQ input level.
Band1 Fc [Hz]
Sets the center frequency of Band 1.
Q
Sets the bandwidth of Band 1. p.773.
Gain [dB]
Sets the gain of Band 1.
Band2 Fc [Hz]
Sets the center frequency of Band 2.
Q
Sets the bandwidth of Band 2. p.773.
Gain [dB]
Sets the gain of Band 2.
Band3 Fc [Hz]
Sets the center frequency of Band 3.
Q
Sets the bandwidth of Band 3. p.773.
Gain [dB]
Sets the gain of Band 3.
Band4 Fc [Hz]
Sets the center frequency of Band 4.
Q
Sets the bandwidth of Band 4. p.773.
[+/–100]
[Normal, Wet Invert]
[Dry, 1:99...99:1, Wet]
Wet / Dry
Multitap Delay
Feedback
Delay
(2)
(1)
High Damp
Mt.Dly Wet / Dry
Wet / Dry
[0...100]
[20...1.00k]
[0.5...10.0]
[–18...+18]
[50...5.00k]
[0.5...10.0]
[–18...+18]
[300...10.00k]
[0.5...10.0]
[–18...+18]
[500...20.00k]
[0.5...10.0]
Mono-Mono Serial
113: P4EQ - Multitap Delay
Source
Selects the Wet/Dry modulation source for the phaser.
Amount
Sets the Wet/Dry modulation amount for the phaser.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
Gain [dB]
Sets the gain of Band 4.
MULTITAP DELAY
Tap1 Time [msec]
Sets the Tap1 delay time.
Tap2 Time [msec]
Sets the Tap2 delay time.
Tap1 Level
Sets the Tap1 output level. p.832.
Feedback (Tap2)
Sets the Tap2 feedback amount.
High Damp [%]
Sets the damping amount in the high range.
Wet/Dry
Sets the multitap delay effect balance. p.824.
Source
Selects the Wet/Dry modulation source for the
multitap delay.
Amount
Sets the Wet/Dry modulation amount for the multitap
delay.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
[Off...Tempo]
[+/–100]
[–18...+18]
[0.0...1360.0]
[0.0...1360.0]
[0...100]
[+/–100]
[0...100]
[Dry, 1:99...99:1, Wet]
[Off...Tempo]
[+/–100]
857