Sequencer P3: Midi Filter/Zones; 3-1: Midi Filter1 - Korg Electronic Keyboard Parameter Manual

Sequencer P3: MIDI Filter/Zones

3–1: MIDI Filter1
1–1a
1–1b
3–1a
Here you can select whether or not to apply filtering to
the MIDI data received by MIDI tracks 1–16. For
example even if two tracks are receiving the same
MIDI channel, one can be set to respond to damper
pedal activity while the other does not.
These MIDI filter settings have no effect on the
MIDI messages that have already been recorded.
These settings affect the MIDI messages that are
transmitted when you adjust program, pan,
volume, portamento and send 1/2 parameters of a
track whose Status (2–1a) is set to BTH, EXT, or EX2.
On (checked): Reception of MIDI data is enabled.
Tracks whose Status (2–1a) is INT or BTH will receive
these types of MIDI messages on their respective
channels. The type of effects that are checked will be
applied to the program of each track when the
OASYS's controllers are operated or when MIDI data is
received. (The effect dynamic modulation function is
not affected by these settings.)
Settings that regulate MIDI transmission/reception of
the OASYS itself are made in MIDI Filter (Global 1–1c).
If the user-assignable controllers that can be filtered in
the MIDI Filter 2 and 3 pages are set to MIDI control
changes, filtering will be performed for these control
changes. In this case, any control change filtering that
is being performed in the MIDI Filter 1 and 2 pages
will be given priority. Furthermore, if the same control
change is assigned to multiple controllers for which
there are filter settings in the MIDI Filter 2 and 3 pages,
checking any one of these will enable that control
change.
Off (unchecked): Reception of MIDI data is disabled.
Sequencer P3: MIDI Filter/Zones
Note: MIDI CC# = MIDI control change message
numbers.
3–1a: MIDI Filter 1
Track 01 (Track Number)
Enable Program Change
Specifies whether or not MIDI program change
messages will be received.
Enable After Touch
Specifies whether or not MIDI after touch messages
will be received.
Enable Damper
Specifies whether or not MIDI CC#64 hold (damper
pedal) messages will be received.
Enable Portamento SW
Specifies whether or not MIDI CC#65 portamento
on/off messages will be received.
Enable JS X as AMS
Specifies whether or not MIDI pitch bend messages
(the X axis of the OASYS's joystick) will be received to
control the AMS effect assigned to JS X. (This is not a
filter for MIDI pitch bend message reception.) For
more information, please see "Alternate Modulation
Sources (AMS)" on page 965.
3–1: MIDI Filter1
3–1PMC
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]
477