095: Stereo Bpm Multitap Delay - Korg Electronic Keyboard Parameter Manual

Effect Guide
Adjust [%]
Fine-adjust the left channel delay time.
R Delay Base Note
Selects the type of notes to specify the right channel
delay time. p.822.
Times
Sets the number of notes to specify the right channel
delay time. p.822.
Adjust [%]
Fine-adjust the right channel delay time.
L Feedback
Sets the feedback amount for the left channel.
R Feedback
Sets the feedback amount for the right channel.
Source
Selects the modulation source of feedback amount.

095: Stereo BPM Multitap Delay

This four-tap delay enables you to select a tempo and
rhythm pattern to set up each tap.
Stereo In - Stereo Out
Left
Input Level D-mod
High Damp Low Damp
Mode
High Damp Low Damp
Input Level D-mod
Right
Tempo
BPM
Base Note x Times
BPM
Base Note x Times
INPUT
Input Level Dmod [%]
Sets the modulation amount of the input level. p.820.
Source
Selects the modulation source for the input level. p.820.
DELAY
BPM
MIDI syncs to the system tempo; 40-240 sets the tempo
manually for this individual effect. p.822.
Time Over?>
The maximum delay time is 1,360msec. If the
combination of BPM, Base Note, and Times exceeds
this limit, the error message "OVER!" will appear. If
this occurs, change the delay time parameters so that
this message no longer appears.
Mode
Switches the left and right delay routing. p.831.
844
[–2.50...+2.50]
[ ... ]
[x1...x32]
[–2.50...+2.50]
[+/–100]
[+/–100]
[Off...Tempo]
Wet / Dry
Feedback
Delay
(2)
(1)
Tap1=(1)
Tap1 Level Mode Spread
Tap2=(2)
(1)
(2)
Delay
Feedback
Wet / Dry
[+/–100]
[Off...Tempo]
[MIDI, 40.00...240.00]
[---, OVER!]
[Normal, Cross Feedback,
Cross Pan1, Cross Pan2]
L Amount
Sets the modulation amount of the left channel
feedback.
R Amount
Sets the modulation amount of the right channel
feedback.
High Damp [%]
Sets the damping amount in the high range. p.829.
Low Damp [%]
Sets the damping amount in the low range. p.829.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
Tap 1 Base Note
Selects the type of notes to specify the delay time for
Tap1. p.822.
Times
Sets the number of notes to specify the delay time for
Tap1. p.822.
Tap 2 Base Note
Selects the type of notes to specify the delay time for
Tap2. p.822.
Times
Sets the number of notes to specify the delay time for
Tap2. p.822.
Feedback (Tap2)
Sets the Tap2 feedback amount.
Source
Selects the modulation source of the Tap2 feedback
amount.
Amount
Sets the modulation amount of the Tap2 feedback
amount.
Tap1 Level
Sets the Tap1 output level. p.832.
High Damp [%]
Sets the damping amount in the high range. p.829.
Low Damp [%]
Sets the damping amount in the low range. p.829.
Spread
Sets the width of the stereo image of the effect sound.
p.829.
[+/–100]
[+/–100]
[0...100]
[0...100]
[ ... ]
[x1...x32]
[ ... ]
[x1...x32]
[+/–100]
[Off...Tempo]
[+/–100]
[0...100]
[0...100]
[0...100]
[+/–100]