052: Stereo Random Phaser - Korg Electronic Keyboard Parameter Manual

Effect Guide
MIDI/Tempo Sync
BPM
Base Note
Times
When MIDI/Tempo Sync is on, the LFO speed is set by
BPM, Base Note, and Times, instead of Frequency. For
more information, see "MIDI/Tempo Sync" on
page 777.
Type [Individual, Common1, Common2]
This controls whether the effect uses its individual
LFO, or one of the Common FX LFOs. For more
information, see "LFO Type" on page 777.

052: Stereo Random Phaser

This is a stereo phaser. The effect uses a step-shape
waveform and random LFO for modulation, creating a
unique phasing effect.
Stereo In - Stereo Out
Left
Right
LFO: Step-Tri/Random
PHASER
Manual
Sets the frequency to which the effect is applied.
Depth
Sets the depth of LFO modulation.
Resonance
This controls the intensity of the phaser. For more
information, see "Resonance" on page 805.
High Damp [%]
Sets the resonance damping amount in the high range.
p.805.
LFO
Waveform
Selects the LFO Waveform. For more information, see
"Waveform" on page 779.
Phase [degrees]
Sets the LFO phase difference between the left and
right. See "Phase [degrees]" on page 779.
806
[Check-box]
[MIDI, 40.00...240.00]
[ ... ]
[x1...x32]
Wet / Dry
Phaser
Resonance
High Damp
Phaser
Wet / Dry
LFO Phase
[0...100]
[0...100]
[+/–100]
[0...100]
[Step-Tri, Step-Sin, Random]
[–180...+180]
Common LFO Phase Offset [degrees]
When Type is set to Common FX LFO 1 or 2, this lets
you offset the phase from the master LFO.
OUTPUT
Wet/Dry [–Wet...–1:99, Dry, 1: 99...Wet]
Sets the balance between the "wet" processed sound
and the dry input. Negative values invert the phase of
the wet signal. This interacts with Resonance; for more
information, see "Resonance" on page 805.
Source
Selects a modulation source for Wet/Dry.
Amount
Sets the modulation amount for Wet/Dry.
Frequency [Hz]
Step Frequency [Hz]
Source
Amount
Step Amount
These parameters control the speed of the LFO when
MIDI/Tempo Sync is Off. For more information, see
"Frequency" on page 779.
MIDI/Tempo Sync
BPM
Base Note
Times
Step Note
Times
These parameters control the speed of the LFO when
MIDI/Tempo Sync is On. For more information, see
"Frequency" on page 779.
Type (Step) [Individual, Common1, Common2]
Common LFO Phase Offset [degrees]
These parameters control the LFO source for the steps;
they do not affect the triangle or sine LFOs. For more
information, see "Step LFO type" on page 779.
OUTPUT
Wet/Dry [–Wet...–1:99, Dry, 1: 99...Wet]
Sets the balance between the "wet" processed sound
and the dry input. Negative values invert the phase of
the wet signal. This interacts with Resonance; for more
information, see "Resonance" on page 805.
Source
Selects a modulation source for Wet/Dry.
[+/–180]
[Off...Tempo]
[+/–100]
[0.02...20.00]
[0.05...50.00]
[Off...Tempo]
[–20.00...+20.00]
[–50.00...+50.00]
[Check-box]
[MIDI, 40.00...240.00]
[ ... ]
[x1...x32]
[ ... ]
[x1...x32]
[+/–180]
[Off...Tempo]