Table of Contents
Advertisement
Program mode: HD-1
0–9: Control Surface
0–9b
0–9a
0–9c
0–9d
0–9e
0–9f
The Control Surface is the set of 9 sliders, 8 knobs, and
16 switches to the left of the LCD display. It looks like a
mixer, but it can do other things as well, including
editing sounds, controlling KARMA, and sending
MIDI messages to external devices.
This page shows you the current values for each of the
sliders, knobs, and buttons, along with information
about what they are controlling. For instance, you can:
• Adjust the volume and pan for Oscillators 1 and 2
• Control the Program's EQ settings and Master
Effects Send levels
• Modulate sounds and effects using the Real Time
Knobs
• Control KARMA, and select KARMA scenes, using
the sliders and switches
• Edit sounds using Tone Adjust
• Assign sliders, knobs, and switches to different
Tone Adjust parameters
Local Control On/Off and the Control Surface
The Control Surface generates and receives MIDI CCs
and System Exclusive messages, so that you can record
knob, switch, and slider movements into a sequencer.
This means that the Global mode Local Control setting
is important:
• If Local Control is On, the physical Control Surface
will work properly as long as MIDI is not being
looped back into the OASYS.
• If Local Control is Off, you must loop back MIDI
into the OASYS in order for the physical Control
Surface to work properly.
18
• Regardless of the Local Control setting, you can
always edit Control Surface parameters via the
touch-screen.
For more information, see "Local Control and the
Control Surface" on page 651.
Control Assign Switches and Tabs
You can switch the Control Surface between its
different functions using either the tabs on the left side
of the LCD display, or the front-panel Control Assign
switches. The tabs and the front-panel switches mirror
one another; when you change one of them, the other
changes as well.
Control Assign switches
In Program mode, you can select one of five different
functions:
TIMBRE/TRACK lets you adjust the volume, pan, and
send levels for Oscillators 1 and 2, along with the
Program EQ. In Combi and Sequencer modes, you can
also use this to select two different banks of Timbres or
Tracks, as shown by the LEDs to the right of the switch.
0–9PMC
INPUTS
HDR 1-8
HDR 9-16 6
Advertisement
Table of Contents
