Korg Electronic Keyboard Parameter Manual page 507

Btm (Key Zone Bottom)
Top (Key Zone Top)
Please see "Key Zones" on page 376.
Note: In Sequencer mode, MIDI data for each KARMA
Module is transmitted and received on the "Input
Channel" and "Output Channel" (7–1c) that you
specify for each Module.
Transpose
Thru In Z (Thru In Zone)
Trans (Transpose In Zone)
Thru Out Z (Thru Out Zone)
Trans (Transpose Out Zone)
Please see "Key Zones" on page 376.
KARMA - MIDI Input / Output Channel
Track Select = Track01
MIDI IN
Tch Also
This specifies whether the MIDI channel of the MIDI
track selected in Track Select will be used for MIDI
input in addition to the MIDI channel specified by
"Input Channel."
Off (unchecked): Only the MIDI channel specified by
"Input Channel" will be used as the MIDI input
channel for the KARMA Module.
On (checked): The MIDI channel specified by "Input
Channel" and the MIDI channel of the MIDI track
selected by Track Select will be used as the MIDI input
channels for the KARMA Module.
If you check "Tch Also," you will also be able to control
the KARMA function from the keyboard (transmitted
on the MIDI channel of the MIDI track selected by
Track Select).
Note: If you've selected Master Track or Audio Track
for Track Select, the MIDI channel of the MIDI track
shown in "Selected Track Info:" will be used.
Not available if the Module's "Input Channel" is
Tch or the same MIDI channel as the MIDI track
selected for Track Select.
[C–1...G9]
[C–1...G9]
[Off, On]
[–36...+36]
[Off, On]
[–36...+36]
KARMA ON/OFF = ON
In : 01ch KARMA Module [A]
01ch
In : 01ch KARMA Module [B]
In : 01ch KARMA Module [C]
In : 16ch KARMA Module [D]
16ch
[Off, On]
Sequencer P7: KARMA
7–1c: MIDI I/O
Specifies the MIDI input/output channels for the four
KARMA Modules used by a Sequencer mode song.
Note: These settings make it possible to use multiple
KARMA Modules, and simultaneously play multiple
tracks of different MIDI channels. If you wish to real-
time record such a performance, use multi-track
recording setup (Sequencer 0–1a: Multi REC).
Input Channel
Specifies the MIDI input channel for each KARMA
Module.
MIDI data from the keyboard or from MIDI IN that
matches the specified MIDI channel will be input to the
KARMA Module. (See the diagram below, "KARMA-
MIDI Input/Output Channel.")
Tch: Automatically match the MIDI channel
(Sequencer 2–1a) of the track selected by Track Select
(Sequencer 0–1a).
Out : 01ch
Out : 02ch
Out : 03ch
Out : 04ch
Output Channel
Specifies the MIDI output channel for each KARMA
Module.
The MIDI data from each KARMA Module will be
transmitted on the MIDI output channel specified for
that KARMA Module, and will be sounded by tracks
with matching channels. For real-time recording, data
will be recorded on tracks with matching channels.
(See the diagram below, "KARMA-MIDI
Input/Output Channel.")
Tch: Automatically match the MIDI channel
(Sequencer 2–1a) of the track selected by Track Select
(Sequencer 0–1a).
Example 1
With the following settings, switching Track Select
(the track you play) to change programs will also
switch to a different KARMA Module at the same time,
causing a different phrase to play. (See the diagram
"Example 1," below.)
1. Set MIDI Track 1 as follows.
"Program Select": a Guitar category program
MIDI Channel: 01
2. Set MIDI Track 2 as follows.
7–1: GE Setup/Key Zones
[01...16, Tch]
Track 01
01ch
Track 02
02ch
Track 03
03ch
04ch Track 04
05ch Track 05
06ch Track 06
[01...16, Tch]
497