Table of Contents
Advertisement
EXi Program P0: Play
0–1: Main
EGs, LFOs, and Step Sequencer
Step Sequencer Graphic
This shows a graphic overview of the per-voice step
sequencer.
Press this area to jump to the Step Sequencer page.
EG 1...4, Amp EG Graphics
These show the shapes of the five EGs. Touch any of
them to jump directly to the corresponding edit page.
LFO 1, 2, 3, 4 Graphic
These show the waveforms and shapes of the four
LFOs. Touch any of them to jump directly to the
corresponding edit page.
Common
The graphics along the right side of the screen show
the most important Common parameters, which are
shared by both EXi in the Program. This section will
always show the same parameters, regardless of which
EXi are being used.
Common Voice Assign Mode
This shows the voice assign mode of the Program–
either POLY or MONO.
Press this area to jump to the Program Basic page.
Common Step Sequencer
This shows a graphic overview of the Common Step
Sequencer.
Press this area to jump to the Common Step Sequencer
page.
Common LFO Graphic
This shows the waveform of the Common LFO.
Press this area to jump to the Common LFO page.
3 Band EQ Graphic
This shows the mid-sweepable 3-band EQ.
Press this area to jump to the EQ page.
IFX, MFX/TFX
Press the IFX area to jump to the IFX Routing page.
Press the MFX/TFX area to jump to the MFX Routing
page.
KARMA GE Name
This shows the name of the selected KARMA GE.
Press this area to jump to the GE Setup/Key Zones
page.
173
Advertisement
Table of Contents
