067: Detune; 068: Pitch Shifter - Korg Electronic Keyboard Parameter Manual

Effect Guide

067: Detune

This effect offsets the pitch slightly from the input
signal. Compared to a chorus, this can be used to create
a more subtle thickening effect,
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Input Level
+
Detune
Input Level
Right
INPUT
Input Level Dmod [%]
Sets the modulation amount of the input level.
Source
Selects the modulation source for the input level.
Input Level
x1.0
Input Level Dmod= +50
x0.5 Input Level Dmod= +100
Higher
Zero Max

068: Pitch Shifter

Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Input Level
+
Pitch Shifter
Input Level
Right
This effect changes the pitch of the input signal. You
can select from three types: Fast (quick response),
Medium, and Slow (preserves tonal quality). You can
also create an effect in which the pitch is gradually
raised (or dropped) using the delay with feedback.
INPUT
Input Level Dmod [%]
Sets the modulation amount of the input level. p.820.
Source
Selects the modulation source for the input level✎
p.820.
PITCH SHIFTER
Mode
Switches Pitch Shifter mode. p.821.
820
High Damp
Delay
Feedback
[Off...Tempo]
Input Level Dmod
Input Level
x1.0 Input Level Dmod= —50
Input Level Dmod= —100
x0.5
D -mod D -mod
Higher
Zero Max
High Damp
Delay
Post
Pre
Feedback
Feedback Position
[Off...Tempo]
[Slow, Medium, Fast]
PITCH SHIFTER
Pitch Shift [cents]
Sets the pitch difference from the input signal.
Source
Wet / Dry
Selects a modulation source for pitch shift.
Amount
Sets the modulation amount for pitch shift.
Wet / Dry
DELAY
Delay Time [msec]
[+/–100]
Sets the delay time.
Feedback
Sets the feedback amount.
High Damp [%]
Sets the damping amount in the high range.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
Pitch Shift [1/2 steps]
Sets the pitch shift amount by steps of a semitone.
Wet / Dry
p.821.
Fine [cents]
Sets the pitch shift amount by steps of a cent. p.821.
Source
Wet / Dry
Selects the modulation source of pitch shift amount.
p.821.
Pitch Shift Amount
Sets the modulation amount of pitch shift amount.
p.821.
Fine Amount
Sets the modulation amount of pitch shift amount.
[+/–100]
p.821.
DELAY
Delay Time [msec]
Sets the delay time.
Feedback Position
Switches the feedback connection. p.821.
Feedback
Sets the feedback amount. p.821.
[+/–100]
[Off...Tempo]
[+/–100]
[0...1000]
[+/–100]
[0...100]
[–24...+24]
[+/–100]
[Off...Tempo]
[–24...+24]
[+/–100]
[0...2000]
[Pre, Post]
[+/–100]