Korg Electronic Keyboard Parameter Manual page 671

2–2a: User Octave Scale
User Octave Scale [User Octave Scale 00...15]
Selects the User Octave Scale that you want to edit.
Tune
Makes pitch settings for each note in the octave.
When you adjust the pitch of each note in the octave
(C–B) in one-cent steps, your settings will be applied to
all octaves. This adjustment is relative to equal
temperament.
A setting of –99 lowers the pitch approximately a
semitone below normal pitch.
A setting of +99 raises the pitch approximately a
semitone above normal pitch.
The note can also be selected by holding down the
ENTER switch and playing a note on the keyboard.
By executing the page menu command "Copy Scale,"
you can copy settings from a preset scale (other than
Stretch) or from another user scale.
2–2b: User All Notes Scale
Tune
Makes independent pitch settings for each of the 128
notes.
Adjust the pitch of each of the 128 notes (C–1 – G9) in
one-cent steps. This adjustment is relative to equal
temperament.
A setting of –99 lowers the pitch approximately a
semitone below normal pitch.
A setting of +99 raises the pitch approximately a
semitone above normal pitch.
Use the horizontal scroll bar to move to the key range
that you want to set, and select the key that you want
to specify.
Note: The note can also be selected by holding down
the ENTER switch and playing a note on the keyboard.
By executing the page menu command "Copy Scale,"
you can copy settings from a preset scale (including
Stretch) or another user scale.
▼ 2–2: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 138.
• 0: Write Global Setting. For more information, see
"Write Global Setting" on page 682.
• 1: Copy Scale. For more information, see "Copy
Scale" on page 688.
Global P2: Controller/Scale
[–99...+99]
[–99...+99]
2–2: User Scale
661