Combination Mode; Combination P0: Play; 0-1: Program Select/Mixer - Korg Electronic Keyboard Parameter Manual

Combination P0: Play

This is the main page of Combination mode. Among
other things, you can:
• Select combinations
• Edit the KARMA function in simple ways
• Make audio input and resampling settings for use
in Combination mode
• Use the control surface
Auto Song Setup
The Auto Song Setup feature copies the current
Program or Combination into a Song, and then puts
the OASYS in record-ready mode.
0–1: Program Select/Mixer
0–1a
0–1b
This is the main page for selecting and playing
Combinations. You can also set the Program, status,
pan, and volume for each of the 16 Timbres.
Tip: Wherever you are in the Combination mode pages,
pressing EXIT three times (or fewer) will take you back
to this page, and select the Combination name. You can
then immediately use the numeric keys or
switches to select a different Combination.
For instance, if you're on any page other than P0: Play:
• Press it once to go to the previously-selected tab on
the main P0 page, such as Control Surface or Prog
Select/Mixer.
• Press it again to go to the first tab on the main P0
page–the main Combination Play page. If you had

Combination mode

/
If inspiration for a phrase or song strikes you while
you're playing, you can use this function to start
recording immediately. To do so:
1. Hold down the ENTER key and press the
SEQUENCER REC/WRITE key.
The Setup to Record dialog box will open and ask "Are
you sure?"
2. Press OK.
You will automatically enter Sequencer mode, and will
be in the record-ready state.
3. Press the START/STOP key to start the sequencer
and begin recording.
previously selected a parameter on this page, that
parameter will be selected.
• Press it a third time to select the main Combination
name parameter.
0–1a: Combination Select
Bank [INT–A...INT–G, USER–A...USER–G]
This indicates the currently selected combination bank.
Press one of the BANK SELECT INT A – USER G
switches to select the desired bank.
0–1PMC
321