Table of Contents
Advertisement
• 0: Memory Status. For more information, see
"Memory Status" on page 524.
• 1: Exclusive Solo. For more information, see
"Exclusive Solo" on page 138.
• 2: Rename Song. For more information, see
"Rename Song" on page 524.
• 3: Delete Song. For more information, see "Delete
Song" on page 524.
• 4: Copy From Song. For more information, see
"Copy From Song" on page 524.
• 5: Load Template Song. For more information, see
"Load Template Song" on page 524.
0–8: Audio In/Sampling
0–7a
0–8a
0–8c
Here you can adjust the settings for the analog/digital
audio signal input (AUDIO INPUT, S/P DIF), and the
sampling-related settings for Sequencer mode.
In Sequencer mode, the external audio sources you
specify here can be recorded to audio tracks or
sampled. (You can also record or sample a song that's
played back by the OASYS or your own playing on the
keyboard.) You can also use the OASYS as a 6-in/10-
out effect processor.
You can't record a Song or pattern while sampling.
Nor can you sample while recording a Song or
pattern.
Using the control surface to adjust Audio Input
You can use the control surface to adjust the Audio
Input Send1 (to MFX1), Send2 (to MFX2),
Play/Rec/Mute, Solo On/Off, Pan, and Level.
For more information, please see "0–9c: Audio Inputs"
on page 22.
Sequencer P0: Play/REC
• 6: Save Template Song. For more information, see
"Save Template Song" on page 525.
• 7: FF/REW Speed. For more information, see
"FF/REW Speed" on page 525
• 8: Set Location (for Locate Key.) For more
information, see "Set Location (for Locate Key)" on
page 525.
• 9: GM Initialize. For more information, see "GM
Initialize" on page 526.
• 10: Copy From Combination. For more
information, see "Copy from Combination" on
page 526.
• 11: Copy From Program. For more information, see
"Copy From Program" on page 526.
The control surface will control the Global mode
settings if "Use Global Setting" is On (checked).
0–8a: Audio Input
Use Global Setting
On (checked): The Audio Input settings (Input1,
Input2, Input3, Input4, S/P DIF L, S/P DIF R) you
specify in Global mode (P0– Audio page) will be used.
Normally you will leave this On (checked). The Audio
Input settings you make in Global will always be valid;
the Audio Input settings will not change even if you
switch songs.
Off (unchecked): The Audio Input settings (Input1,
Input2, Input3, Input4, S/P DIF L, S/P DIF R) you
specify here will be used.
0–8: Audio In/Sampling
0–8PMC
0–8b
[Off, On]
435
Advertisement
Table of Contents
