029: Stereo Guitar Cabinet; 030: Guitar Amp Model +P4Eq - Korg Electronic Keyboard Parameter Manual

Effect Guide

029: Stereo Guitar Cabinet

This simulates the acoustical character of a guitar
amp's speaker cabinet.
Stereo In - Stereo Out
Left
Trim
Trim
Right
CABINET SIMULATOR
Trim
Sets the input level.

030: Guitar Amp Model +P4EQ

This combines a guitar amp simulation (which even
faithfully replicates the distortion and tone control
circuitry) with a four-band equalizer.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
+
Guitar Amp Model
Right
D -mod
GUITAR AMP MODEL
Type [AC15, AC15TB, AC30, AC30TB, UK BLUES,
UK 70'S, UK 80'S, UK 90'S, UK MODERN, US
MODERN, US HIGAIN, BOUTIQUE OD, BOUTIQUE
CL, BLACK 2x12, TWEED 1x12, TWEED 4x10]
Selects the type of the amplifier. For more information,
see "Type" on page 791.
Gain
Sets the input gain.
Volume
Sets the output level.
Source
Selects the modulation source for the output level.
Amount
Sets the modulation amount of the output level.
Bass
Sets the bass (low range) level.
Middle
Sets the middle (mid range) level.
790
Cabinet Simulator
Cabinet Simulator
[0...100]
Volume
Parametric 4Band EQ
[0...100]
[0...100]
[Off...Tempo]
[+/–100]
[0...100]
[0...100]
Type [TWEED 1x12, TWEED 4x10, BLACK 2x10,
Selects the type of the cabinet. p.791.
Wet / Dry
Air
Sets the mic position.
OUTPUT
Wet / Dry
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
Treble
Sets the treble (high range) level.
Cut / Presence
This controls the high-frequency tone.
Wet / Dry
If the Type is AC15...AC30TB, the Cut (high frequency
attenuation) parameter is available. For other Type
settings, the Presence (high frequency boost)
parameter is available.
Wet / Dry
PARAMETRIC EQ
Band1 Fc [Hz]
Sets the center frequency of Band 1.
Q
Sets Band 1's bandwidth.
Gain [dB]
Sets the gain of Band 1.
Band2 Fc [Hz]
Sets the center frequency of Band 2.
Q
Sets Band 2's bandwidth.
Gain [dB]
Sets the gain of Band 2.
Band3 Fc [Hz]
Sets the center frequency of Band 3.
Q
Sets Band 3's bandwidth.
Gain [dB]
Sets the gain of Band 3.
Band4 Fc [Hz]
Sets the center frequency of Band 4.
BLACK 2x12, AC15, AC30, AD412,
UK H30, UK T75, US V30]
[20...1.00k]
[0.5...10.0]
[50...5.00k]
[0.5...10.0]
[300...10.00k]
[0.5...10.0]
[500...20.00k]
[0...100]
[0...100]
[0...100]
[–18...+18]
[–18...+18]
[–18...+18]